Frequently asked questions about Hubcaps

We have written a series of hubcap and wheel related articles that may help answer your questions

How to determine hubcap or wheel size
So you want to bolt your hubcaps on?
Replica versus original Toyota hubcaps

For information about specific makes

Acura hubcaps-General information and installation help.
Buick hubcaps-General information, installation help and wire spoke tutorial.
Chevy hubcaps-General information, installation advise and care.
Chrysler, Dodge hubcaps-Breakdown of different types and installation instructions.
Honda hubcaps-Information on choosing and installing Honda hubcaps.
Hyundai hubcaps-Info on the different attachment system and ways to retain them better.
Pontiac hubcaps-Specific information on general care and installation.
Saturn hubcaps- Explanation of how to install Saturn hubcaps to ensure you won't loose them.

Other hubcap and wheel FAQ's

Q: How can I tell if my wheels are aluminum or steel?
A: Most steel wheels take full wheel covers or hubcaps. Aluminum wheels take a smaller center cap cover and are either a machined finish or painted finish with a hard clear coating. There are some "styled" steel wheels which are painted. These will not have the clear coating, just a painted surface which scratches easily. Chrome wheels can be either steel or aluminum. Its a little harder to tell with chrome. If you are not sure, feel free to call us 800-301-5814 and we'll try to help.
Q: I loose a lot of hubcaps, how can I keep them on better?
A: The key to keeping hubcaps on a car is the retaining clips on the back. Hubcaps with metal retaining clips can be "stretched" out slightly towards the edge of the wheel. This will tighten the hubcap within the wheel and keep it on much better. This should be done every time the hubcaps are removed. Hubcaps with plastic clips will only stay on if all the clips are intact. There is generally no way to adjust this type. The best way to keep them on is to use care when installing them, not to break or bend back the plastic clips. This is how 90% of the plastic covers are lost.